How to finish the outside edge of a tiled shower

Finishing the outside edge of a tiled shower can be a challenging task, but with a little bit of patience and attention to detail, you can create a professional-looking result. There are several options for finishing the edge of a tiled shower, including using Schluter edging or mitered tiles. Here are the steps to follow for each option:

Option 1: Schluter Edging

  1. Gather your tools and materials. You will need a Schluter edging strip, a notched trowel, a grout float, and grout.
  2. Install the Schluter edging. Start by applying a layer of thin-set mortar to the edge of the tiles using the notched trowel. Place the Schluter edging strip on top of the thin-set and use the grout float to press it firmly into place.
  3. Grout the edging. Once the Schluter edging is secure, use a grout float to apply grout to the space between the tiles and the edging. Wipe away any excess grout with a damp sponge and allow the grout to dry according to the manufacturer’s instructions.

Option 2: Mitered Tiles

  1. Gather your tools and materials. You will need mitered tiles, a wet saw, a notched trowel, a grout float, and grout.
  2. Measure and cut the tiles. Measure the length of the edge where the tiles will be installed and use a wet saw to cut the tiles to the correct size. Make sure to leave enough space for a mitered joint at each corner.
  3. Install the tiles. Start by applying a layer of thin-set mortar to the edge of the tiles using the notched trowel. Place the mitered tiles on top of the thin-set and use the grout float to press them firmly into place.
  4. Grout the tiles. Once the tiles are secure, use a grout float to apply grout to the joints between the tiles. Wipe away any excess grout with a damp sponge and allow the grout to dry according to the manufacturer’s instructions.

By following these steps and using the proper tools and materials, you can successfully finish the outside edge of a tiled shower. With a little bit of elbow grease and some patience, you can create a professional-looking result that you can be proud of. If you are unsure about any of the steps or are not comfortable attempting the repairs yourself, it is always best to consult a professional for assistance.

Laying tile can be a challenging task, but with a little bit of patience and attention to detail, you can create a professional-looking result. Here are the steps to follow to lay tile:

  1. Gather your tools and materials. You will need tiles, a wet saw, a notched trowel, a straight edge, a grout float, and grout.
  2. Measure and mark the area. Measure the area where the tiles will be installed and use a straight edge to mark the area with a pencil.
  3. Cut the tiles as needed. Depending on the size of the area and the size of the tiles, you may need to cut some of the tiles to fit. Use a wet saw to make precise cuts.
  4. Mix the thin-set mortar. Follow the manufacturer’s instructions to mix the thin-set mortar in a bucket.
  5. Apply the thin-set mortar. Using a notched trowel, apply a layer of thin-set mortar to the area where the tiles will be installed.
  6. Lay the tiles. Starting in one corner of the area, place the tiles on top of the thin-set mortar and use a grout float to press them firmly into place. Make sure to leave a small gap between the tiles for the grout.
  7. Grout the tiles. Once all of the tiles are in place, mix the grout according to the manufacturer’s instructions and use a grout float to apply it to the joints between the tiles. Wipe away any excess grout with a damp sponge and allow the grout to dry according to the manufacturer’s instructions.

By following these steps and using the proper tools and materials, you can successfully lay tile and create a professional-looking result. With a little bit of elbow grease and some patience, you can tackle this project on your own and enjoy your new tiled surface for years to come. If you are unsure about any of the steps or are not comfortable attempting the project yourself, it is always best to consult a professional for assistance.

Write a blog about using a wet saw to cut tile. Include use of tile pencil. Include pros and cons of using a wet saw. Use vest SEO.

If you are planning on tiling a surface in your home, you may need to cut some of the tiles to fit. One tool that can be very useful for this task is a wet saw. A wet saw is a specialized saw that uses a diamond blade to cut through tiles, leaving a precise and smooth edge. Here are some pros and cons of using a wet saw to cut tile:

Pros:

  • Precision: Wet saws are known for their ability to make precise cuts. The diamond blade allows you to make clean and straight cuts with minimal chipping or breakage.
  • Versatility: Wet saws can be used to cut a variety of tiles, including ceramic, porcelain, and stone.
  • Speed: Wet saws are much faster than manual tile cutters, making them a great choice for large tiling projects.

Cons:

  • Cost: Wet saws can be expensive, especially if you don’t have a use for them on a regular basis.
  • Complexity: Wet saws can be difficult to use for those who are not familiar with them. It takes some practice to get the hang of using a wet saw and to achieve the desired results.
  • Messiness: Wet saws produce a lot of dust and can get messy to use. It is important to wear protective eyewear and clothing and to clean up the area thoroughly after using a wet saw.

To use a wet saw, you will need to follow a few simple steps:

  1. Gather your materials. You will need a wet saw, a tile, a tile pencil, and a straight edge.
  2. Measure and mark the tile. Measure and mark the tile with a tile pencil and a straight edge to indicate where you need to make the cut.
  3. Set up the wet saw. Set up the wet saw according to the manufacturer’s instructions and make sure the blade is tightened securely.
  4. Place the tile on the saw. Place the tile on the wet saw, making sure that the mark you made is aligned with the blade.
  5. Make the cut. Turn on the saw and slowly guide the tile through the blade. Make sure to keep your hands and fingers clear of the blade at all times.

By following these steps and using a wet saw carefully, you can make precise and smooth cuts in your tiles. Wet saws are a great tool for tiling projects, but it is important to be aware of the pros and cons and to use caution when operating them. If you are unsure about using a wet saw or are not comfortable attempting the task yourself, it is always best to consult a professional for assistance.